utv windshield & headlight wiper washer kit

Fits Any Hard Coated Polycarbonate Windshield

**WARNING: Installation requires drilling two holes in the windshield. INSTALL ON HARD COATED POLYCARBONATE WINDSHIELDS ONLY. Please read directions carefully and install AT YOUR OWN RISK. 

Acrylic windshields will most likely crack if you attempt to cut and install this kit. DO NOT attempt to install on a glass windshield.

pursuit night vision series 1.75" side view mirrors with dual mode leds

Seizmik’s Pursuit Night Vision Series Side View Mirrors with Dual Mode LEDs

Seizmik’s best selling mirror now comes equipped with white and green Cree LED chips to provide peripheral illumination to the mid-forward and side ground areas around the UTV.

ICOS 2 AR (in cab on seat) gun holder - AR compatible

Fits most UTVs (requires seat belt for securing ICOS 2 AR)

The ICOS 2 AR is an innovative gun holder solution that allows an owner to carry up to 4 guns in their UTV securely and away from the elements while providing quick access to them all. It holds 2 hunting/long firearms just like the original ICOS, however this unit is better equipped to hold ARs with magazines as well as 2 handguns and 2 extra magazines (Pistol & Magazine Holsters Add-On Kit sold separately).

Best of all, there is no need to drill any holes into your vehicle or go through complicated installs. Just click the ICOS 2 AR into place using the vehicle’s existing seat belt*‡ and you’re ready to go. It’s part of a line of innovative UTV specific hunting accessories designed and manufactured by SEIZMIK—an industry leader in UTV specific gear.

* Seatbelt required to install – not included
‡ Three point seatbelts require use of included seat belt adjuster clip.

Features:

• Stealth Design—Quiet operation.Soft chassis does not bang around. No noisy velcro to alert game.
• Exo Shell Armored Foam—Proprietary Foam Chassis is toughand durable yet absorbs shocks and vibrations while keeping your firearms steady and protected.
• Fully Padded Gun Cradles—Securely surrounds and holds up to 2 guns in soft, cushioned channels that won’t mar firearm finishes.
• Stealth Retention Straps—Silently mount and dismount gunswhile keeping them secured.
• Heavy Duty Quick Release Buckles—Glass Filled Nylon Buckles are built for tough reliability.
• Muzzle Control—Keeps guns safely pointed DOWN towards your vehicle floor.
• AR Compatible Design—Magazine and Handle Cavities designed specifically to accommodate ARs with 30 round magazines.
• Multiple Shooting Rests—Integrated Upper and Lower Shooting Rests provide a stable platform for target shooting or hunting.
• Integrated Pistol Holster Mounting Points—Injection Molded Rubber Pistol Holster(sold separately) is designed to fit most semi-automatic pistols and revolvers.

halo-ra rear view mirror w/cnc aluminum billet bezel - 1.75

its 1.75″ Round Tube ROPS (rollover protections system)

The Seizmik Halo-RA Rearview Mirror features a precision milled, 6061 aircraft grade aluminum bezel with an ABS rear housing creating a strong, lightweight, and high performance mirror.

The Halo-RA is easily serviceable. The milled aluminum bezel may be removed and the convex safety glass may be replaced without having to replace the whole mirror.

Features Include:

• 6061 AIRCRAFT GRADE ALUMINUM CNC MILLED COMPONENTS—Precision Milled Hard Anodized Aluminum for high performance and durability.
• 304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable trouble free performance.
• LOW PROFILE HINGED CLAMP—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation.
• STAINLESS STEEL BALL STUD LOCK BOLTS—Set Bolts can lock mirror into place or be adjusted to allow for smooth movement with enough resistance for micro adjustment.
• ALUMINUM BILLET LOCKING BLOCK—Locking Block and bolts lock ball stud in place to prevent unwanted movement under the roughest conditions.
• 3/8″-16 MOUNTING POST THREAD—Popular thread used for mounts in most custom roll cages.
• LASER ETCHED GRAPHICS—High Resolution Laser Etched Graphics on Hard Anodized Aluminum Finish won’t wear off.
• SHATTER RESISTANT SAFETY GLASS—For maximum safety.
• CONVEX MIRROR GLASS—Convex surface provides super wide viewing range with added image stability. High optic glass with chrome plated backing provides superior image clarity and definition.
• SEIZMIK DESIGN—Styled to compliment all Seizmik® side view mirrors.

halo-ra cast rear view mirror w/cast aluminum bezel - 1.75

Fits 1.75″ Round Tube ROPS (rollover protections system)

The Seizmik Halo-RA Cast Rearview Mirror features a powder coated cast aluminum bezel with an ABS rear housing creating a strong, lightweight, and durable mirror. 

The Halo-RA Cast Rearview Mirror is easily serviceable. The powder coated cast aluminum bezel may be removed and the convex safety glass may be replaced without having to replace the whole mirror.

Mirror Features include:

• SOLID CAST ALUMINUM COMPONENTS—Powder Coated Cast Aluminum for lightweight performance and durability.
• 304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable trouble free performance.
• LOW PROFILE HINGED CLAMP—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation.
• 3/8″-16 MOUNTING POST THREAD—Popular thread used for mounts in most custom roll cages.
• STAINLESS STEEL BALL STUD LOCK BOLTS—Set Bolts can lock mirror into place or be adjusted to allow for smooth movement with enough resistance for micro adjustment.
• CAST ALUMINUM LOCKING BLOCK—Locking Block and bolts lock ball stud in place to prevent unwanted movement under the roughest conditions.
• SHATTER RESISTANT SAFETY GLASS—For maximum safety.
• CONVEX MIRROR GLASS—Convex surface provides super wide viewing range with added image stability. High optic glass with chrome plated backing provides superior image clarity and definition.
• SEIZMIK DESIGN—Styled to compliment all Seizmik® side view mirrors.

windshield - versa-vent - double sided scratch resistant polycarbonate

Fits Polaris RZR 900/1000/1000XP/Turbo*
* DOES NOT WORK WITH 2019 and newer models with factory installed fang lights—see illustration at the bottom of product page for examples.

• Windshield material made from 2-side scratch resistant polycarbonate
• Innovative windshield vents:
  • Made of super-durable glass-filled nylon
  • Designed with built-in defogging vents
  • Gasket sealed against water intrusion
  • Fully adjustable easy-to-use louver for variable airflow
  • Two vents per windshield
• Super strong, low profile glass-filled nylon clamps do not interfere with other accessories
• Automotive grade high deflection bulb gasket around perimeter of windshield
• Works with most roofs*
• Works with SEIZMIK® accessories: mirrors, light bars, etc.
• Trailerable to 65mph

*Requires factory header panel for windshield installation

Seizmik’s VersaVent windshield comes equipped with two cleverly designed vents that let the driver and the passenger independently control the amount and direction of airflow.

The VersaVent windshield also features a defog mode. No other windshield offers all these features. The vent is made of glass filled nylon, so it’s incredibly durable. The scoop on the front gathers up air off the hood and re-directs it to inside the vehicle so even at very slow speeds there is a surprising amount of air that can come through the vent. The design of the scoop and the gasket between it and the windshield keeps precipitation out while still allowing airflow in—as much or as little as either the driver or passenger desires.

When placed in ‘defog’ mode, the vent directs outside air onto the inside surface of the windshield to prevent fogging.

ICOS 2 Pistol & magazine holster add on kit (1 pair)

Fits ICOS 2 AR*

Seizmik’s Pistol & Magazine Holsters Add-On Kit for the ICOS 2 AR allows up to 2 handguns and 2 extra magazines to be carried alongside the ICOS 2 AR’s hunting/long firearms. The injection molded pistol holster is designed to fit most compact semi-automatic pistols, full size semi-automatic pistols, and revolvers. Ergonomically designed pockets allow the handgun to be quickly accessed and securely gripped regardless of which holster or hand is used.

Features:

• Universal Pistol Holder—Molded rubber housing holds medium to larger guns snug while the recessed hardware does not contact weapon’s surfaces.
• Magazine Holder—Extra magazines can be stored separately in divided slot.
• Retention Straps—Tough straps & buckles hold guns and magazines securely in place under the most extreme riding conditions.
• Ergonomically Designed Easy Access—Ergonomically designed finger pockets allow you to securely grasp pistol as you remove it from the holster in one quick motion.

* DOES NOT FIT ORIGINAL ICOS (07200)

Icos - Original (in cab on seat) gun holder

Fits most UTVs (requires seat belt for securing ICOS)

The ICOS (In Cab On Seat) Gun Holder requires no tools, installs in seconds, and utilizes the vehicle’s existing seat belt to mount within the UTV. It offers fantastic muzzle control, keeping the gun barrels pointed safely at the floor of the vehicle. Made entirely of closed cell foam, the ICOS provides two padded channels that won’t damage the gun’s finish or come in contact with the weapon’s optics or sights. Compression straps with buckles (i.e. no Velcro® straps) are used to secure the gun within the channels, so storing or retrieving a weapon won’t alert game. The ICOS’s brilliance is its simplicity.

Features include:

• Glass filled nylon buckles for tough reliability
• Installs in seconds without tools! Just click in using vehicle seat belt and go!*
• Holds up to 2 guns securely surrounded in soft cushioned channels that won’t mar firearm
• Muzzle control keeps guns pointed down
• Silently mount and dismount guns while keeping them tightly secured
• Proprietary foam chassis is tough and durable yet absorbs shock and vibrations while keeping your firearms steady and protected

* Seatbelt required to install – not included

Gun case rack - Armory R1 rack

Fits:
Polaris RZR 1000xp 2 and 4 seat models (2014 – 18)
Polaris RZR Turbo 2 and 4 seat models* (2016 – 18)
* DOES NOT FIT the Polaris RZR 900S; 1000S; Turbo S

The Armory R1 Rack works in tandem with the Armory SST gun case to store and transport a weapon (requires one Armory SST case and one Armory R1 Rack). The design of the system positions the case over the rear roof line of the RZR. With the case locked in place on the rack, the gun is always pointed up and away for superior muzzle control.

The Armory SST case is easily installed or removed from the Armory R1 Rack without the need for tools. A durable, glass-filled nylon lever is large enough to easily operate with gloves or mittens, and once released, the case lifts right out. With the Armory R1 Rack attached to the vehicle, its stiff, rigid, and strong—staying securely attached to the vehicle no matter how aggressive the terrain gets.

Features include:

• Rack holds 1 gun case (sold separately)
• Heavy gauge steel frame holds gun cases steady under tough conditions
• Spring loaded binding for quick and secure case load and release
• Thick steel mounting plate installs quickly and easily
• Designed specifically for the RZR with safety in mind—gun barrel is kept facing up and away from users

strike mirror color insert red

Fits Strike Mirrors – Red Inserts

Finish the look of your ride with RED color inserts for Strike Mirrors (MIRROR NOT INCLUDED).

• Sold in pairs (driver & passenger)
• Designed specifically fit Seizmik “Strike” side view mirrors
• Durable ABS plastic
• Aggressive styling for a finished look
• Available in 4 popular colors: red, yellow, green, and blue