John Deere

Featured products

Picture of steel grab handle

steel grab handle

The most stable removable UTV Grab Handle on the market!

Seizmik’s grab handle is an extremely durable solution for adding a stable grip to your UTV. The steel construction provides a stable grip. It’s easy to take it on and off due to the simple but heavy duty velcro strap. Rubber pads keep it from sliding and twisting while driving through the roughest terrain or entering and exiting the UTV.

Fits all UTVs (except Polaris Ranger XP 900, Kubota RTV-X1100C, and John Deere Gator XUV Deluxe Cab)

  • Heavy duty—Steel handle made to last
  • Comfortable—Rubber grip reduces wear on hands
  • Easy Install—Velcro strap makes it easy to take on and off
  • Specific To You—Place it anywhere on your UTV’s rollbar
  • One Size Fits Most—Fits 1.5″ to 2″ Roll Bars


Please note that the Grab Handle does NOT fit the Ranger XP900, Gator Deluxe Cab or Kubota RTV-X1100C.

Used on: universal
€ 53,21 excl tax
Picture of framed door kit

framed door kit

Fits Full Size John Deere Gator XUV (Note the door kit DOES NOT fit the Deluxe Cab).

  • The only doors that work with any hard top or windshield
  • Sturdy 3/4″ tubular steel frame and steel door latch
  • Durable UV resistant PVC coated heavyweight nylon fabric
  • Easy installation, no drilling required, doesn’t void any warranties
  • Easy installation with Seizmik’s innovative Quikfit Tightening System
  • Tight all around seal resists water and wind intrusion into the cab
  • The whole door comes off in seconds, no tools required
  • Upper door covers are easily removable for ventilation
  • Extra window on the bottom half of the doors for added visibility to maneuver in tight spots
  • Ships regular UPS, not oversized

Used on: full size gator xuv/hpx
€ 1.368,88 excl tax
Picture of ICOS 2 AR (in cab on seat) gun holder - AR compatible

ICOS 2 AR (in cab on seat) gun holder - AR compatible

Fits most UTVs (requires seat belt for securing ICOS 2 AR)

The ICOS 2 AR is an innovative gun holder solution that allows an owner to carry up to 4 guns in their UTV securely and away from the elements while providing quick access to them all. It holds 2 hunting/long firearms just like the original ICOS, however this unit is better equipped to hold ARs with magazines as well as 2 handguns and 2 extra magazines (Pistol & Magazine Holsters Add-On Kit sold separately).

Best of all, there is no need to drill any holes into your vehicle or go through complicated installs. Just click the ICOS 2 AR into place using the vehicle’s existing seat belt*‡ and you’re ready to go. It’s part of a line of innovative UTV specific hunting accessories designed and manufactured by SEIZMIK—an industry leader in UTV specific gear.

* Seatbelt required to install – not included
‡ Three point seatbelts require use of included seat belt adjuster clip.

Features:

  • Stealth Design—Quiet operation.Soft chassis does not bang around. No noisy velcro to alert game.
  • Exo Shell Armored Foam—Proprietary Foam Chassis is toughand durable yet absorbs shocks and vibrations while keeping your firearms steady and protected.
  • Fully Padded Gun Cradles—Securely surrounds and holds up to 2 guns in soft, cushioned channels that won’t mar firearm finishes.
  • Stealth Retention Straps—Silently mount and dismount gunswhile keeping them secured.
  • Heavy Duty Quick Release Buckles—Glass Filled Nylon Buckles are built for tough reliability.
  • Muzzle Control—Keeps guns safely pointed DOWN towards your vehicle floor.
  • AR Compatible Design—Magazine and Handle Cavities designed specifically to accommodate ARs with 30 round magazines.
  • Multiple Shooting Rests—Integrated Upper and Lower Shooting Rests provide a stable platform for target shooting or hunting.
  • Integrated Pistol Holster Mounting Points—Injection Molded Rubber Pistol Holster(sold separately) is designed to fit most semi-automatic pistols and revolvers.

Fitment: Universal
€ 357,89 excl tax
Picture of Gun Case - Armory set

Gun Case - Armory set

The Armory SST (Secure Storage & Transport) Gun Case works in tandem with the Armory X Rack to store and transport two weapons (requires two Armory SST cases and one Armory X Rack). The design of the system positions the cases over the dump bed of most vehicles, leaving the bed clear for gear or game. With the cases locked in place on the rack, the guns are always pointed up and away for superior muzzle control. The Armory SST offers a unique locking hinge which keeps the case open, freeing up both hands to place, retrieve, or work on the gun while in the case.

The shape of the case will accommodate any long gun up to 52″ and ARs with or without optics. Moveable foam blocks inside the Armory SST case keep the weapon firmly in place, assuring nothing makes contact with the sights or optics even over the roughest terrain. There’s even enough room inside the Armory SST to store extra rounds, equipment, or cleaning supplies.

The Armory SST case is easily installed or removed from the Armory X Rack without the need for tools. A durable, glass-filled nylon lever is large enough to easily operate with gloves or mittens, and once released, the case lifts right out. With the Armory X Rack attached to both sides of the dump bed, its stiff, rigid, and strong—staying securely attached to the vehicle no matter how aggressive the terrain gets.

Features include:

  • Case lid cut design provides superior access to Shotguns, Rifles, and ARs
  • Foam Gun Cushions can be custom positioned according to weapon for maximum stability
  • Fits guns up to 52″ long

Universal fitment
€ 311,20 excl tax
Picture of Gun case rack - Armory X-Rack

Gun case rack - Armory X-Rack

Fits Polaris Mid-Size Ranger (works with Lock & Ride); John Deere Mid-Size Gator (drill & bolt); Honda Pioneer 700 (drill & bolt); and beds 44″-48″ inside bed measurement (drill & bolt)

The Armory X Rack works in tandem with the Armory SST gun case to store and transport two weapons (requires two Armory SST cases and one Armory X Rack). The design of the system positions the cases over the dump bed of most vehicles, leaving the bed clear for gear or game. With the cases locked in place on the rack, the guns are always pointed up and away for superior muzzle control.

The Armory SST case is easily installed or removed from the Armory X Rack without the need for tools. A durable, glass-filled nylon lever is large enough to easily operate with gloves or mittens, and once released, the case lifts right out. With the Armory X Rack attached to both sides of the dump bed, its stiff, rigid, and strong—staying securely attached to the vehicle no matter how aggressive the terrain gets.

Features include:

  • Rack holds up to 2 gun cases (sold separately)
  • Heavy gauge steel frame holds gun cases steady under tough conditions
  • Spring loaded binding for quick and secure case load and release
  • Thick steel mounting plate installs quickly and easily
  • Designed specifically for UTVs with safety in mind—gun barrels are kept facing up and away from users

Fitment: Mid size rangers and beds 44"-48" (inside bed measurement - drill & bolt)
€ 248,96 excl tax
Picture of Icos - Original (in cab on seat) gun holder

Icos - Original (in cab on seat) gun holder

Fits most UTVs (requires seat belt for securing ICOS)

The ICOS (In Cab On Seat) Gun Holder requires no tools, installs in seconds, and utilizes the vehicle’s existing seat belt to mount within the UTV. It offers fantastic muzzle control, keeping the gun barrels pointed safely at the floor of the vehicle. Made entirely of closed cell foam, the ICOS provides two padded channels that won’t damage the gun’s finish or come in contact with the weapon’s optics or sights. Compression straps with buckles (i.e. no Velcro® straps) are used to secure the gun within the channels, so storing or retrieving a weapon won’t alert game. The ICOS’s brilliance is its simplicity.

Features include:

  • Glass filled nylon buckles for tough reliability
  • Installs in seconds without tools! Just click in using vehicle seat belt and go!*
  • Holds up to 2 guns securely surrounded in soft cushioned channels that won’t mar firearm
  • Muzzle control keeps guns pointed down
  • Silently mount and dismount guns while keeping them tightly secured
  • Proprietary foam chassis is tough and durable yet absorbs shock and vibrations while keeping your firearms steady and protected

* Seatbelt required to install – not included

Fitment: Universal
€ 264,52 excl tax
Picture of Gun case rack - Armory X-Rack

Gun case rack - Armory X-Rack

Fits John Deere Full Size Gator (clamps attach to bed rails or drill & bolt in to steel beds)

The Armory X Rack works in tandem with the Armory SST gun case to store and transport two weapons (requires two Armory SST cases and one Armory X Rack). The design of the system positions the cases over the dump bed of most vehicles, leaving the bed clear for gear or game. With the cases locked in place on the rack, the guns are always pointed up and away for superior muzzle control.

The Armory SST case is easily installed or removed from the Armory X Rack without the need for tools. A durable, glass-filled nylon lever is large enough to easily operate with gloves or mittens, and once released, the case lifts right out. With the Armory X Rack attached to both sides of the dump bed, its stiff, rigid, and strong—staying securely attached to the vehicle no matter how aggressive the terrain gets.

Features include:

  • Rack holds up to 2 gun cases (sold separately)
  • Heavy gauge steel frame holds gun cases steady under tough conditions
  • Spring loaded binding for quick and secure case load and release
  • Thick steel mounting plate installs quickly and easily
  • Designed specifically for UTVs with safety in mind—gun barrels are kept facing up and away from users

Fitment: Full size gator XUV/HPX
€ 248,96 excl tax
Picture of halo-ra cast rear view mirror w/cast aluminum bezel - 1.75

halo-ra cast rear view mirror w/cast aluminum bezel - 1.75

Fits 1.75″ Round Tube ROPS (rollover protections system)

The Seizmik Halo-RA Cast Rearview Mirror features a powder coated cast aluminum bezel with an ABS rear housing creating a strong, lightweight, and durable mirror. 

The Halo-RA Cast Rearview Mirror is easily serviceable. The powder coated cast aluminum bezel may be removed and the convex safety glass may be replaced without having to replace the whole mirror.

All Seizmik mirrors come with a 100% Unlimited Lifetime Warranty—regardless of how the mirror was damaged. Every mirror, no matter what—even if your cow eats it or you shoot it (actual customer warranty issues—we can’t make this stuff up)!

Mirror Features include:

  • SOLID CAST ALUMINUM COMPONENTS—Powder Coated Cast Aluminum for lightweight performance and durability.
  • 304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable trouble free performance.
  • LOW PROFILE HINGED CLAMP—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation.
  • 3/8″-16 MOUNTING POST THREAD—Popular thread used for mounts in most custom roll cages.
  • STAINLESS STEEL BALL STUD LOCK BOLTS—Set Bolts can lock mirror into place or be adjusted to allow for smooth movement with enough resistance for micro adjustment.
  • CAST ALUMINUM LOCKING BLOCK—Locking Block and bolts lock ball stud in place to prevent unwanted movement under the roughest conditions.
  • SHATTER RESISTANT SAFETY GLASS—For maximum safety.
  • CONVEX MIRROR GLASS—Convex surface provides super wide viewing range with added image stability. High optic glass with chrome plated backing provides superior image clarity and definition.
  • SEIZMIK DESIGN—Styled to compliment all Seizmik® side view mirrors.

Used on: 1.75" universal
€ 152,08 excl tax
Picture of halo-ra cast aluminum trim kit - green

halo-ra cast aluminum trim kit - green

Fitment: For Seizmik Halo-RA series rearview mirrors (HALO-RA LED; HALO-RA CAST; HALO-RA BILLET)

  • Designed specifically to fit Seizmik “HALO-RA” series rearview mirrors (HALO-RA LED and HALO-RA CAST)
  • Cast Aluminum construction
  • Metallic flake painted finish
  • Includes matching Rearview Mirror Bezel and Lock Block
  • Styled for a finished, coordinated look for your ride
  • Available in 4 popular colors: red (18100), green (18101), blue (18102), and yellow (18103)
  • UNLIMITED LIFETIME WARRANTY

Used on: seizmik halo-ra billet; led; and cast rearview mirrors
€ 45,61 excl tax
Picture of halo-ra cast aluminum trim kit - yellow

halo-ra cast aluminum trim kit - yellow

Fitment: For Seizmik Halo-RA series rearview mirrors (HALO-RA LED; HALO-RA CAST; HALO-RA BILLET)

  • Designed specifically to fit Seizmik “HALO-RA” series rearview mirrors (HALO-RA LED and HALO-RA CAST)
  • Cast Aluminum construction
  • Painted finish
  • Includes matching Rearview Mirror Bezel and Lock Block
  • Styled for a finished, coordinated look for your ride
  • Available in 4 popular colors: red (18100), green (18101), blue (18102), and yellow (18103)
  • UNLIMITED LIFETIME WARRANTY

Used on: seizmik halo-ra billet; led; and cast rearview mirrors
€ 45,61 excl tax
Picture of mirror - rear view

mirror - rear view

Fits 1.75″ ROPS (rollover protection system)

The wide angle rearview mirror is the perfect rearview mirror for UTVs. It has an incredible range of adjustments with different mounting options to allow it to fit on nearly any UTV with a 1.75″ roll bar (for 2″ roll bars, see part # 18052). The double ball joint allows the rider to position the mirror in any configuration they choose and the friction pads inside the ball joints keep the mirror from moving on rough trails. The oversized convex viewing surface reduces vibration and allows the rider to see anything happening behind them. The all steel clamp, shaft and bracket create a heavy duty mirror that can really take a beating.

  • Aggressive Styling—A finished look that also helps to reinforce the high impact plastic housing
  • Durable Steel 1.75″ Clamp—Designed to provide a strong grip and keep the mirror stable on the roughest terrain
  • Easy Installation—Simple one screw installation
  • Huge Convex Viewing Surface—Minimizes vibration and gives the driver view of everything behind
  • Double Ball Joints—Maximizes adjustability
  • Not Just for UTVs—Designed specifically for UTVs, but the Wide Angle Rear View Mirror also works great on boats, tractors and recreational vehicles

Double Ball Joints give the Wide Angle Rear View Mirror very high adjustability.

Used on: 1.75" universal
€ 63,16 excl tax
Picture of halo-r rear view mirror w/bezel - 1.75

halo-r rear view mirror w/bezel - 1.75

Fits 1.75″ Round Tube ROPS (rollover protections system)

Features:

  • Two Ball Joints—Maximizes range of adjustment.
  • High Impact ABS Plastic Housing—Resists damage.
  • Shatter Resistant Safety Glass—For maximum safety.
  • Convex Mirror Surface—Wider viewing range and image stabilization.
  • Built Tough—Heavy duty steel clamp with low mass design for maximum strength and durability.
  • Impact Resistant ABS Bezel—Protects and secures mirror glass and allows for easy glass replacement.
  • Color Kits Available—Customize your look (ships with grey bezel and back logo).
  • Seizmik Design—Styled to compliment all SEIZMIK side view mirrors.
  • UNLIMITED LIFETIME WARRANTY
Part # Clamp Size Fitment
18053 Can-Am Defender Header Panel Can-Am Defender
18055 1.625″ w/shims for 1.5″ Honda Pioneer 500/700; Yamaha Viking; and Yamaha Wolverine
18056 1.75″ Round Tube Polaris Ranger; Polaris General; Polaris RZR; John Deere Gator; Arctic Cat Wildcat; Yamaha Rhino and YXZ
18057 2.0″ w/shims for 1.875″ Round Tube Can-Am; Kubotas; Kawasaki; Honda 1000
18058 Polaris Pro-Fit Header Panel Pro-Fit Ranger (Full and Midsize)
18059 Can-Am Factory Rearview Mirror Mounting Plate Can-Am X3


Used on: 1.75" universal
€ 106,45 excl tax
Picture of mirror 'pursuit'

mirror 'pursuit'

Fits 1.75″ ROPS (rollover protection system)

Seizmik’s best selling Pursuit Side View mirrors—backed by the best warranty on the market! Features include:

  • Cast Aluminum Housing—Designed to withstand the most extreme punishment
  • Weather Sealed Caps—Designed to keep out debris (red, yellow, and green color kits available)
  • Rubber Vibration Isolators—Keeps a clear image and the mirrors from sliding
  • Position Tension Adjustment Bolts—For keeping your mirror at just the right angle
  • Low Profile Steel Mounting Brackets—Allow mirrors to work with most any windshield
  • UNLIMITED LIFETIME WARRANTY

  • We make good stuff and we stand behind it.

Used on: 1.75" universal
€ 224,62 excl tax
Picture of pursuit night vision series 1.75" side view mirrors with dual mode leds

pursuit night vision series 1.75" side view mirrors with dual mode leds


Seizmik’s Pursuit Night Vision Series Side View Mirrors with Dual Mode LEDs

Seizmik’s best selling mirror now comes equipped with white and green Cree LED chips to provide peripheral illumination to the mid-forward and side ground areas around the UTV.

FITMENT INFO

Part # ROPS SIZE/STYLE VEHICLES INCLUDED
18086 1.75″ Round Tube ROPS Polaris Full and Midsize Round Tube Ranger; Polaris RZR; Honda Pioneer; John Deere Full Size Gator XUV/HPX; Kawasaki Mule 3000/4000; Kawasaki Teryx; Yamaha Rhino; Yamaha Viking; Yamaha YXZ; and Textron Wildcat

GREEN LIGHT

Used for preserving night vision and providing more visual acuity and better differentiation between colors at low-light levels.

WHITE LIGHT

Used for lighting up the mid-forward area not covered by headlights or light bars, increasing the peripheral illumination.

PERIPHERAL ILLUNINATION

Illuminates the ground area so drivers and passengers can see the conditions they are stepping onto/into.

Strategically placed to provide extended peripheral vision illumination to the mid-forward and side ground areas.

Allows drivers to see what’s next to them on tight paths.

All Seizmik mirrors come with a 100% Unlimited Lifetime Warranty—regardless of how the mirror was damaged. Every mirror, no matter what—even if your cow eats it or you shoot it (actual customer warranty issues—we can’t make this stuff up)!

LED FEATURES

  1. A CAST ALUMINUM HOUSING with IP68 water resistant rating.
  2. DUAL COLOR MODE features Green Night Vision for better visual acuity at low light levels and White for bright illumination when needed.
  3. WHITE LEDs:
    1. Chips: 3x 11.9W Cree® XBD
    2. Lumens: 565LM
  4. GREEN LEDs:
    1. Chips: 3x 6.6W Cree® XBD
    2. Lumens: 266LM

MIRROR FEATURES

  1. CAST ALUMINUM HOUSING — Ultra tough metal housing can withstand the most extreme punishment.
  2. POSITION TENSION ADJUSTMENT BOLTS — Always be able to keep it tight as new.
  3. FULL BREAKAWAY GEOMETRY — Designed to break away during impacts to minimize damage.
  4. PRE-SET POSITION DETENTS — Delrin® Detents allow the mirror to be quickly popped back into place.
  5. ADAPTIVE 360º BRACKET ROTATION — Will accommodate any angle roll cage pillar and provides optimal viewing position, so a user can mount it high or low and adjust to perfect viewing position.
  6. LOW PROFILE MOUNTING BRACKETS — Allow mirrors to work with most any windshield.
  7. ENCLOSED FLOATING MIRROR MOUNT — Mirror glass may be independently adjusted inside housing and is replaceable.
  8. SHATTER-RESISTANT SAFETY GLASS — For maximum safety.
  9. CONVEX MIRROR SURFACE — Provides wide viewing angle and image stability.
  10. WEATHER SEALED CAPS — Removable caps protect hardware from moisture and debris (red, yellow, green, and blue color kits available).
  11. FITMENTS FOR MOST ANY VEHICLE — Round Tube ROPS; Polaris® Pro-Fit ROPS; and CAN-AM® Profiled ROPS.

Notched Delrin® detents allow the mirror to fold in when hit and be returned to its original position in one move.

The adjustable independent glass stays where you set it, keeping riders focused on the trail and not their mirror.

The Pursuit mirrors are fully adjustable and serviceable. Independent convex safety glass provides a wide viewing angle and can be replaced without having to replace the whole mirror.

Used on: 1.75" universal
€ 425,86 excl tax
Picture of abs 'strike' side view mirror pair

abs 'strike' side view mirror pair

Fits 1.75″ Round Tube ROPS (rollover protection system)

  • Adaptive 360 Bracket Rotation—Will accommodate any angle roll cage pillar & provide optimal viewing position, so you can mount it high or low and adjust to perfect position every time
  • Full Breakaway Geometry—Designed to break away during impacts to prevent damage
  • Ball Socket Joint — Provides a broad range of viewing angles
  • Low Mass Steel Mounting Clamp — Provides maximum strength and durability
  • Convex Mirror — More than doubles your field of view and provides image stabilization
  • Shatter-resistant Safety Glass and High-Impact ABS Plastic Housing — Resist damage
  • Position Tension Adjustment Bolt — Let you always be able to keep it tight as new
  • Sold as Pairs
  • Color Kits Available — Customize the look of your ride (Comes standard with black inserts)
  • UNLIMITED LIFETIME WARRANTY

Please note: For vehicles with 1.625″ diameter ROPS (i.e. Honda Pioneer 700/500) an additional FREE shim kit is required. Please contact Seizmik Customer Service at 919-957-0044 or via email for the FREE shim kit.

COLOR INSERT KITS AVAILABLE*

*Sold separately—black comes standard with the mirrors.

Used on: 1.75" universal
€ 121,66 excl tax
Picture of windshield - versa-vent - uv resistant polycarbonate & abs lower panel

windshield - versa-vent - uv resistant polycarbonate & abs lower panel

Fits Full Size John Deere Gator XUV/HPX

Versa-Vent windshield for John Deere Gator XUV/HPX – Uncoated Polycarbonate with ABS lower panel.

  • 0.220 Thick UV Resistant Polycarbonate—Maximizes visibility while minimizing elemental intrusion
  • 2 Durable Vents—Made of glass-filled nylon and made to last
  • Gasket Sealed Components—For protection against wind and water intrusion
  • Glass-filled Nylon Clamps—Custom designed, super strong, and low profile so they do not interfere with other accessories
  • Fully Adjustable Air Flow—Easy-to-use louver makes changing the airflow through your vents simple
  • Defog Mode—Incoming air can be directed at the inside window surface to help prevent fogging
  • No Tools Required—Easy to turn knobs makes installation a breeze
  • Seizmik Compatible—Works with Seizmik accessories: mirrors, light bars, etc.
  • Trailerable—Up to 65mph when properly prepared

Seizmik’s VersaVent windshield comes equipped with two cleverly designed vents that let the driver and the passenger independently control the amount and direction of airflow.

The VersaVent windshield also features a defog mode. No other windshield offers all these features. The vent is made of glass filled nylon, so it’s incredibly durable. The scoop on the front gathers up air off the hood and re-directs it to inside the vehicle so even at very slow speeds there is a surprising amount of air that can come through the vent. The design of the scoop and the gasket between it and the windshield keeps precipitation out while still allowing airflow in—as much or as little as either the driver or passenger desires.

When placed in ‘defog’ mode, the vent directs outside air onto the inside surface of the windshield to prevent fogging.

Airflow:

Defog Mode:

Used on: full size gator xuv/hpx
€ 608,38 excl tax
Picture of halo-ra cast aluminum trim kit - red

halo-ra cast aluminum trim kit - red

Fitment: For Seizmik Halo-RA series rearview mirrors (HALO-RA LED; HALO-RA CAST; HALO-RA BILLET)

  • Designed specifically to fit Seizmik “HALO-RA” series rearview mirrors (HALO-RA LED and HALO-RA CAST)
  • Cast Aluminum construction
  • Metallic flake painted finish
  • Includes matching Rearview Mirror Bezel and Lock Block
  • Styled for a finished, coordinated look for your ride
  • Available in 4 popular colors: red (18100), green (18101), blue (18102), and yellow (18103)
  • UNLIMITED LIFETIME WARRANTY

Used on: seizmik halo-ra billet; led; and cast rearview mirrors
€ 45,61 excl tax
Picture of halo-ra cast aluminum trim kit - blue

halo-ra cast aluminum trim kit - blue

Fitment: For Seizmik Halo-RA series rearview mirrors (HALO-RA LED; HALO-RA CAST; HALO-RA BILLET)

  • Designed specifically to fit Seizmik “HALO-RA” series rearview mirrors (HALO-RA LED and HALO-RA CAST)
  • Cast Aluminum construction
  • Metallic flake painted finish
  • Includes matching Rearview Mirror Bezel and Lock Block
  • Styled for a finished, coordinated look for your ride
  • Available in 4 popular colors: red (18100), green (18101), blue (18102), and yellow (18103)
  • UNLIMITED LIFETIME WARRANTY

Used on: seizmik halo-ra billet; led; and cast rearview mirrors
€ 45,61 excl tax
Picture of mirrors-sideview pair - abs 2016

mirrors-sideview pair - abs 2016

Fits 1.75″ Round Tube ROPS (rollover protection system) (ABS Plastic – 2016)

Product Details

  • Adaptive 360 Bracket Rotation—Will accommodate any angle roll
cage pillar & provide optimal
 viewing position, so you can mount it high or low and adjust to perfect position every time
  • Full Breakaway Geometry—Designed to break away during impacts to prevent damage
  • Convex Mirrors
—More than double your field of rear view
  • High-Impact ABS Plastic Housing—Resists damage
  • Ball Socket Joint—Provides a broad range of viewing angles
  • Heavy-Duty Steel Mounting Clamp/Bracket—Low mass design provides maximum strength and durability
  • Convex Mirror Surface—Provides wider viewing ranger and image stabilization
  • Shatter Resistant Safety Glass—For maximizing safety and longevity
  • Position Tension Adjustment Bolt—Always be able to keep it tight as new
  • UNLIMITED LIFETIME WARRANTY

*This mirror replaces part number 18041

Please note: For vehicles with 1.625″ diameter ROPS (i.e. Honda Pioneer 700/500) an additional FREE shim kit is required. Please contact Seizmik Customer Service at 919-957-0044 or by email in order to request the FREE shim kit.



Used on: 1.75" universal
€ 105,11 excl tax
Picture of halo-ra led rear view mirror w/cast aluminum bezel - 1.75

halo-ra led rear view mirror w/cast aluminum bezel - 1.75

Watch the product video below for more details on Seizmik’s Halo-RA LED Rearview Mirror with a Cast Aluminum Bezel.

“Oooo, Light Up the Cab! Light Up the Cab!” Remember those 80’s late night commercials, well, this is our spoof featuring our new mirror!

Part Number: 18019
Fits 1.75″ Round Tube ROPS (rollover protections system)

The Seizmik Halo-RA LED Rearview Mirror features multimodal, high intensity RGB LEDs and a high intensity COB (Circuit On Board) LED map light along with a powder coated cast aluminum bezel and an ABS rear housing. The result is a strong, lightweight, and durable mirror with a convenient hands free cab light. 

The programmable RGB lights include a high and low intensity level in red, green, and blue color selections.  Red and Green LEDs are for use when preserving visual acuity in low light scenarios, while the blue may be used to match dash accent lights.  

The Halo-RA LED Rearview Mirror is easily serviceable. The powder coated cast aluminum bezel may be removed and the convex safety glass may be replaced without having to replace the whole mirror.  Like all Seizmik mirrors, the Halo-RA LED Rearview Mirror is covered under Seizmik’s 100% Unlimited Lifetime Mirror Warranty.

LED Features include:

  • IP65 WEATHER RESISTANT HOUSING—Will withstand washing with a hose, but don’t submerge it!
  • SCRATCH RESISTANT POLYCARBONATE LENSES—For years of reliable performance.
  • HIGH INTENSITY RGB PROGRAMMABLE LIGHTS—Set preferred color for functional or accent lighting: red for night vision or accent; green for night vision or accent; or blue for accent.
  • HIGH INTENSITY COB MAP LIGHT—2 intensity settings: 30 Lumen Low or 120 Lumen High.
  • OPERATES ON 4 AAA BATTERIES—4 AAA Duracell batteries included.

Mirror Features include:

  • SOLID CAST ALUMINUM COMPONENTS—Powder Coated Cast Aluminum for lightweight performance and durability.
  • 304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable trouble free performance.
  • LOW PROFILE HINGED CLAMP—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation.
  • 3/8″-16 MOUNTING POST THREAD—Popular thread used for mounts in most custom roll cages.
  • STAINLESS STEEL BALL STUD LOCK BOLTS—Set Bolts can lock mirror into place or be adjusted to allow for smooth movement with enough resistance for micro adjustment.
  • CAST ALUMINUM LOCKING BLOCK—Locking Block and bolts lock ball stud in place to prevent unwanted movement under the roughest conditions.
  • SHATTER RESISTANT SAFETY GLASS—For maximum safety.
  • CONVEX MIRROR GLASS—Convex surface provides super wide viewing range with added image stability. High optic glass with chrome plated backing provides superior image clarity and definition.
  • SEIZMIK DESIGN—Styled to compliment all Seizmik® side view mirrors.

Fitments*:

Part #

Clamp Size

Vehicles
18001 Polaris RZR Pro XP Factory Mirror Mounting Plate Polaris RZR Pro XP
18019 1.75″ Any 1.75″ ROPS; Honda Pioneer 1000; Polaris Round Tube Ranger (Full and Midsize); Polaris General; Polaris RS1; Polaris RZR; Textron Wildcat
18020 2.0″ w/shim for 1.875″ Any 1.875″ or 2″ ROPS; Honda Talon; Kawasaki Teryx 750/800
18021 Polaris Pro-Fit Ranger Factory Header Panel Polaris Pro-Fit Ranger (Full and Midsize)
18022 Can-Am X3 Factory Mirror Mounting Plate Can-Am X3
18023 Can-Am Defender Factory Header Panel Can-Am Defender

* Don’t see your machine listed? Call Seizmik toll free at 1-866-838-3366 for help finding the correct Halo-RA Billet Rearview Mirror for your ride.

All Seizmik mirrors come with a 100% Unlimited Lifetime Warranty—regardless of how the mirror was damaged. Every mirror, no matter what—even if your cow eats it or you shoot it (actual customer warranty issues—we can’t make this stuff up)!

Used on: 1.75" universal
€ 210,58 excl tax
Picture of halo-ra rear view mirror w/cnc aluminum billet bezel - 1.75

halo-ra rear view mirror w/cnc aluminum billet bezel - 1.75

its 1.75″ Round Tube ROPS (rollover protections system)

The Seizmik Halo-RA Rearview Mirror features a precision milled, 6061 aircraft grade aluminum bezel with an ABS rear housing creating a strong, lightweight, and high performance mirror.

The Halo-RA is easily serviceable. The milled aluminum bezel may be removed and the convex safety glass may be replaced without having to replace the whole mirror.

Features Include:

  • 6061 AIRCRAFT GRADE ALUMINUM CNC MILLED COMPONENTS—Precision Milled Hard Anodized Aluminum for high performance and durability.
  • 304 STAINLESS STEEL HARDWARE—High Grade Corrosion Resistant Hardware for years of reliable trouble free performance.
  • LOW PROFILE HINGED CLAMP—Clamp design provides extreme clamping power, minimal interference with other accessories, and a simple installation.
  • STAINLESS STEEL BALL STUD LOCK BOLTS—Set Bolts can lock mirror into place or be adjusted to allow for smooth movement with enough resistance for micro adjustment.
  • ALUMINUM BILLET LOCKING BLOCK—Locking Block and bolts lock ball stud in place to prevent unwanted movement under the roughest conditions.
  • 3/8″-16 MOUNTING POST THREAD—Popular thread used for mounts in most custom roll cages.
  • LASER ETCHED GRAPHICS—High Resolution Laser Etched Graphics on Hard Anodized Aluminum Finish won’t wear off.
  • SHATTER RESISTANT SAFETY GLASS—For maximum safety.
  • CONVEX MIRROR GLASS—Convex surface provides super wide viewing range with added image stability. High optic glass with chrome plated backing provides superior image clarity and definition.
  • SEIZMIK DESIGN—Styled to compliment all Seizmik® side view mirrors.

Used on: 1.75" universal
€ 304,18 excl tax
Picture of utv windshield & headlight wiper washer kit

utv windshield & headlight wiper washer kit

Fits Any Hard Coated Polycarbonate Windshield

**WARNING: Installation requires drilling two holes in the windshield. INSTALL ON HARD COATED POLYCARBONATE WINDSHIELDS ONLY. Please read directions carefully and install AT YOUR OWN RISK. 

Acrylic windshields will most likely crack if you attempt to cut and install this kit. DO NOT attempt to install on a glass windshield.

Spray Pattern:

Position and aim the jets to your liking—kit comes with four nozzles and enough fittings and tubing to give you plenty of options.

Dual Independently Adjustable jets:

Each nozzle has 2 jets—each can be independently aimed for optimum coverage.

The UTV Windshield Wiper Washer Kit from Seizmik includes: wiper motor assembly; wiper arm & blade; pump; washer fluid reservoir; hose & fittings; wire harness; and mounting hardware.

Equipped with dual, independently adjustable jets, 110º of wiper range motion to cover the driver’s side of the windshield, and a 2 speed motor with a park position feature that positions the blade high and out of the way when turned off.

Features include:

  • 14” AUTOMOTIVE WIPER BLADE — May be replaced with a standard style wiper blade

  • WIPER MOTOR ASSEMBLY — 2 speed motor with automatic park position

  • STURDY STEEL BACKING PLATE — Heavy Duty mounting structure with rubber vibration isolation bumpers against windshield

  • HOSE — 16’ long hose provides enough length to place jets in a number of locations

  • 1.5 QUART RESERVOIR — Enough capacity to get the job done

  • 4 SPRAY NOZZLES — Independently adjustable, dual jets in each nozzle

  • PLASTIC HOSE FITTINGS — Multiple choices for various configurations

  • SIMPLE INSTALLATION — Position wiper on your windshield, then locate the 2 points to drill

Used on: universal - hard coated polycarbonate windshields only
€ 425,86 excl tax
Picture of versa-vent self install kit (includes 2 vents)

versa-vent self install kit (includes 2 vents)

Fits Any Hard Coated Polycarbonate Windshield

WARNING: Installation requires cutting your windshield. Please read directions carefully and install AT YOUR OWN RISK. Only attempt to cut polycarbonate windshields. Acrylic windshields will most likely crack if you attempt to install this kit. DO NOT attempt to install in glass.

The Versa-Vent self install kit from Seizmik, includes 2 Seizmik Versa-Vents, cutting template, and all mounting hardware. The dual vent system is designed to add driver and passenger ventilation and anti-fogging features to polycarbonate windshields.

The scoop design gathers air off the hood and re-directs it to the inside of the vehicle—even slow speeds generate a surprising amount of air through the vent. The design of the scoop and the gasket between it and the windshield keeps precipitation out while still allowing airflow in—as much or as little as either the driver or passenger desires.

The innovative windshield vents include:

  • Durable glass-filled nylon construction
  • Easy-to-use louvers
  • Variable airflow and defog
  • Gasket seals for minimizing water intrusion

Vents allow for independent control of the amount and direction of airflow.

Airflow:

Seizmik’s Versa Vents are cleverly designed to gather air off the hood of the machine and redirects it to the inside of the vehicle.

Defog Mode:

When placed in ‘defog’ mode, the vent directs outside air onto the inside surface of the windshield to prevent fogging.

Used on: universal - polycarbonate windshields only
€ 106,45 excl tax
Your search did not match any products.
Carrus is using cookies, to guarantee the best shopping experience. Partially cookies will be set by third parties. Privacy Info