4. Can-Am Maverick Trail/Sport

Can-Am Maverick Trail/Sport

1-23 of 23
Picture of pursuit night vision series pro-fit side view mirrors with dual mode leds

pursuit night vision series pro-fit side view mirrors with dual mode leds

Seizmik’s best selling mirror now comes equipped with white and green Cree LED chips to provide peripheral illumination to the mid-forward and side ground areas around the UTV.

GREEN LIGHT

Used for preserving night vision and providing more visual acuity and better differentiation between colors at low-light levels.

WHITE LIGHT

Used for lighting up the mid-forward area not covered by headlights or light bars, increasing the peripheral illumination.

Illuminates the ground area so drivers and passengers can see the conditions they are stepping onto/into. Strategically placed to provide extended peripheral vision illumination to the mid-forward and side ground areas. Allows drivers to see what’s next to them on tight paths.


LED FEATURES

  1. A CAST ALUMINUM HOUSING with IP68 water resistant rating.
  2. DUAL COLOR MODE features Green Night Vision for better visual acuity at low light levels and White for bright illumination when needed.
  3. WHITE LEDs:
    1. Chips: 3x 11.9W Cree® XBD
    2. Lumens: 565LM
  4. GREEN LEDs:
    1. Chips: 3x 6.6W Cree® XBD
    2. Lumens: 266LM

MIRROR FEATURES

  1. CAST ALUMINUM HOUSING — Ultra tough metal housing can withstand the most extreme punishment.
  2. POSITION TENSION ADJUSTMENT BOLTS — Always be able to keep it tight as new.
  3. FULL BREAKAWAY GEOMETRY — Designed to break away during impacts to minimize damage.
  4. PRE-SET POSITION DETENTS — Delrin® Detents allow the mirror to be quickly popped back into place.
  5. ADAPTIVE 360º BRACKET ROTATION — Will accommodate any angle roll cage pillar and provides optimal viewing position, so a user can mount it high or low and adjust to perfect viewing position.
  6. LOW PROFILE MOUNTING BRACKETS — Allow mirrors to work with most any windshield.
  7. ENCLOSED FLOATING MIRROR MOUNT — Mirror glass may be independently adjusted inside housing and is replaceable.
  8. SHATTER-RESISTANT SAFETY GLASS — For maximum safety.
  9. CONVEX MIRROR SURFACE — Provides wide viewing angle and image stability.
  10. WEATHER SEALED CAPS — Removable caps protect hardware from moisture and debris (red, yellow, green, and blue color kits available).
  11. FITMENTS FOR MOST ANY VEHICLE — Round Tube ROPS; Polaris® Pro-Fit ROPS; and CAN-AM® Profiled ROPS.

Used on: polaris pro-fit clamps
€ 425,86 excl tax
Picture of utv mirror - pro-fit roll cages

utv mirror - pro-fit roll cages

Fits Polaris Pro-Fit and Can-Am Profiled ROPS (rollover protection system)

Sold individually—one mirror per box

  • Mounts Anywhere—Mount these universal-sized mirrors as side view or rear view mirrors or use for any vehicle that accepts a 2″ round clamp, such as a tractor or a boat
  • Complete Set of Mirrors —Buy 3 to have 2 side view mirrors and a rear view mirror
  • Large Range of View—Thanks to the mirrors convex surface and large viewing surface, this mirror gives the driver a large range of view
  • Designed Specially for UTV tasks—The high impact plastic allows this mirror to really take a hit and keep on reflecting
  • Ball Socket Joint—The ball socket joint gives the mirror a wide range of viewing angles
  • Specifications—4.5″x8″ viewing surface, Clamp specific for Pro-fit and Can-Am profiled vehicles
  • Shatterproof Tempered Glass—For increased safety

Used on: polaris pro-fit clamps
€ 30,40 excl tax
Carrus is using cookies, to guarantee the best shopping experience. Partially cookies will be set by third parties. Privacy Info