Knowledgebase

Welcome to our knowledgebase. In this database you can find your answers to your questions.

Search results

  • E-Z-GO - 1991-2008 E-Z-GO 4-Cycle Engines - How to set your engine on time with a timing belt - P/N: 1356 or 26626-G01

    Call 0031 30 2334405 or send an email to servicedesk@carrus.com for technical support.  Timing Belt-4-Cycle This factory replacement Timing Belt is used on 1991-2008 E-Z-GO 4-Cycle Engines, includin…

    Call 0031 30 2334405 or send an email to servicedesk@carrus.com for technical support. 

    Timing Belt-4-Cycle

    This factory replacement Timing Belt is used on 1991-2008 E-Z-GO 4-Cycle Engines, including vehicles with 1992-current 295cc and 350cc Fuji-Robin Engines. The timing belt controls the timing of the engine valves.

    • Used on 1991-2008 E-Z-GO Gas TXT, Marathon, Medalist, 804, 875, XI300/500, Workhorse 1200, 4/6-Passenger Shuttle, ST Express, and Refresher Models, and on all 1992-current Fuji 4-Cycle Engines (295cc and 350cc)
    • Controls timing of engine valves
    • Please refer to the Owner's Manual specific to your vehicle for recommendations on when to change the timing belt

    Category:  Motor - Gasoline vehicles

    Brand:  , E-Z-GO

    Date added:  Not recorded

    Date updated:  Not recorded

    Attachments:

    E-Z-GO_Robin_engine_-_Timing_belt.pdf

    Views: 50

  • What type of gasoline should I use in my vehicle?

    What type of gasoline should I use in my vehicle? Please see the instructions below and refer to your Owner's Manual. 4-Cycle Engines: Club Car, E-Z-GO and Yamaha recommends the use of regular unlea…

    What type of gasoline should I use in my vehicle?

    Please see the instructions below and refer to your Owner's Manual.

    4-Cycle Engines: Club Car, E-Z-GO and Yamaha recommends the use of regular unleaded gasoline intended for automotive use with an octane rating of 87.

    Category:  Motor - Gasoline vehicles

    Brand:  , Club Car, E-Z-GO, Yamaha

    Date added:  Not recorded

    Date updated:  Not recorded

    Views: 49

  • What's the difference between a FE350 engine with ACR and without ACR?

    The ACR means – Automatic Compression Release And 80% of the Club car cars come with ACR mainly your small based carts like the DS , CC precedent etc. Just a few carts come with no ACR which are C…

    The ACR means – Automatic Compression Release

    And 80% of the Club car cars come with ACR mainly your small based carts like the DS , CC precedent etc.

    Just a few carts come with no ACR which are CarryAll II, CarryAll 252 and the XRT 900’s 

    The ACR stand for Automatic Compression Release. This type of engine was the clockwise model, which means the clutch rotates clockwise. You can only put this type of engine in a Club Car gas key start vehicle. There are two types of clockwise FE 350's. Those with the ACR, which are for key start only, and those without the ACR, which are for pedal start only. The only difference in the two is the camshaft. On the backside of the ACR camshaft there is a spring gear which is the mechanism for the compression release. So by changing the camshaft either way you could have either engine. The worst part any Club Car 350 engine (not considering the new style) is that they have lifters in them. The lifters act as tappets which ride on the camshaft and force the push rods to open the valves. Much unlike a tappet though, they compress in when the push rods put force to them. That is because of the springs which are located inside of them. Now these lifters pump up with oil and release the oil when compressed by the push rods. Oil travels from the oil pump, through a small brass filter, then through a small opening in the block, next it arrives at the first lifter, goes around it, through a small opening, and hits the last lifter. The problem is that the lifters have a small hole in the side of them which MUST be lined up with the small hole on the inside of the block where the oil travels. If they do not line up then the oil is not properly being pumped into the lifter. And when the lifters are not working, your engine is not working. Alot, and I mean ALOT, of times you'll hear a tap in the engine, which nine times out of ten is the push rod tapping the lifter because the lifter is not compressing. In which case the lifter will need rebuilding, and I would just as quickly suggest that new lifters be put in. But thankfully Club Car has noticed the problem and now build the 350's like the 290 model, in that they use tappets instead of the lifters. However you now have to adjust the valves, which I just really loved the fact that you didn't have to do that with the older style 350 engines, but it's no big deal. Just set each valve at .004inch. and that takes care of them. One more thing, if you should ever find yourself trying to take your camshaft out e-mail me at servicedesk@carrus.com  and leave your phone number and I'll call you back and we will walk through it together. But if your impatient like me then be sure to take the head off and remove the lifters. When you replace the camshaft make sure you line the slot in the end of the camshaft up with the oil pump.

     

     

    Category:  Motor - Gasoline vehicles

    Brand:  Club Car

    Date added:  Not recorded

    Date updated:  Not recorded

    Views: 40

  • E-Z-GO - 11 Hp Fuji-Robin Engine - Installation instructions - Parts number: 72846G02S

    The 11 Hp Fuji-Robin Engine is an OEM (Original Equipment Manufacturer) replacement engine manufactured for installation on E-Z-GO vehicles with a 350cc engine. *For vehicles built before November 20…

    The 11 Hp Fuji-Robin Engine is an OEM (Original Equipment Manufacturer) replacement engine manufactured for installation on E-Z-GO vehicles with a 350cc engine.

    *For vehicles built before November 2003, the MCI Engine Retro-fit Kit is required.  See similar products tab for more information.




     

    Category:  Motor - Gasoline vehicles

    Brand:  E-Z-GO

    Date added:  Not recorded

    Date updated:  Not recorded

    Attachments:

    E-Z-GO_TXT_Gasoline_-_Engine.pdf

    Views: 38

  • E-Z-GO RXV Gasoline - Engine measurements and specifications

    Category:  Motor - Gasoline vehicles

    Brand:  E-Z-GO

    Date added:  Not recorded

    Date updated:  Not recorded

    Attachments:

    E-Z-GO_RXV_Gas_-_Engine_measurments.pdf

    Views: 26

  • E-Z-GO RXV Gasoline - Fuel and air intake system.

    Category:  Motor - Gasoline vehicles

    Brand:  E-Z-GO

    Date added:  Not recorded

    Date updated:  Not recorded

    Attachments:

    E-Z-GO_RXV_Gas_-_Fuel_and_air_intake_system.pdf

    Views: 17

This site uses cookies. Some of the cookies we use are essential for parts of the site to operate and have already been set. You may delete and block all cookies from this site, but parts of the site will not work.