Knowledgebase

Welcome to our knowledgebase. In this database you can find your answers to your questions.

Search results

  • Replacing a faulty controller.

    Replacing a faulty controller.  There are a few things you have to check before you replace your faulty controller.  •           Check the electric motor. Make sure there is no short circuit or high…

    Replacing a faulty controller.

     There are a few things you have to check before you replace your faulty controller.

     •           Check the electric motor. Make sure there is no short circuit or high resistance. The motor must have the right resistance. See article Advanced motor - testing and repair on knowledge base.

    •           Check the solenoid if it have the right resistance and test if it works. See article How to test a solenoid on knowledge base.

    •           Check all the wires A1, A2, F1, F2 or S1, S2, speed sensor wire, harness and connectors for dirt and fractures.

    •           Charge your batteries, how lower the voltage and current are in the batteries how higher the resistance is in the batteries and wires.

     

    After the check and when everything is all right, you can replace your new controller.

    If you have any doubts don’t hesitate to ask.

    Category:  Speed controllers - Electric vehicles

    Brand:  , Club Car, E-Z-GO, Yamaha

    Date added:  Not recorded

    Date updated:  Not recorded

    Views: 97

  • Clubcar Precedent - Controllers IQ or EXEL system? - P/N: OEM 103403401, 102806201, 102806203, 101956501 or 668R, 773R

    Call 0031 30 2334405 or send an email to servicedesk@carrus.com for technical support. 

    Call 0031 30 2334405 or send an email to servicedesk@carrus.com for technical support. 


    Category:  Speed controllers - Electric vehicles

    Brand:  , Club Car

    Date added:  Not recorded

    Date updated:  Not recorded

    Attachments:

    Clubcar_-_Exel_vs_IQ.pdf

    Views: 59

  • How to connect the power to an Alltrax controller for programming.

    How too connect the power to an Alltrax controller for programming. See pdf file for the following information.     Alltrax – AXE – DCX Motor controllers: Communications software.       The pr…

    How too connect the power to an Alltrax controller for programming.

    See pdf file for the following information.

     

     

    Alltrax – AXE – DCX Motor controllers: Communications software.

     

     

     

    The programmable Alltrax electric motor controllers such as the AXE ( series wound montors) and the DCX ( shunt wound motors) include an RS232 communication port.

     

    This port can be used to adjust user settings such as throttle type, power settings and speed settings.

     

    It can also be used to monitor operation of the controller real time.

     

     

     

    The program runs on Microsoft Windows based machines, laptops or desktops using simple user friendly controls.

     

    Alltrax provides this software down-loadable free of charge ( cable not included ).

     

    Controller pro software has not been run on MAC based machines.

     

     

     

    A kit can be purchased from Alltrax wich includes:

     

    • Communications cable – RS232 to USB adapter.
    • CD-R with controller pro operations manual, tech notes and the controller pro software program.
    • Wall wart 220VAC 50 Hz  transformer power supplies 15-20 volt DC to power the logic for programming.
    • Instruction manual and technical notes.
    • Free technical support.

     

     

    Category:  Speed controllers - Electric vehicles

    Brand:  , Club Car, E-Z-GO, Yamaha

    Date added:  Not recorded

    Date updated:  Not recorded

    Attachments:

    Alltrax__-_how_too_connect_the_power_-_Controller-Program-Diagram.pdf

    Views: 32

  • Alltrax controller pro instruction manual.

    Alltrax controller pro instruction manual.   Alltrax – AXE – DCX Motor controllers: Communications software.   The programmable Alltrax electric motor controllers such as the AXE ( series wound mo…

    Alltrax controller pro instruction manual.

     

    Alltrax – AXE – DCX Motor controllers: Communications software.

     

    The programmable Alltrax electric motor controllers such as the AXE ( series wound montors) and the DCX ( shunt wound motors) include an RS232 communication port.

    This port can be used to adjust user settings such as throttle type, power settings and speed settings.

    It can also be used to monitor operation of the controller real time.

     

    The program runs on Microsoft Windows based machines, laptops or desktops using simple user friendly controls.

    Alltrax provides this software down-loadable free of charge ( cable not included ).

    Controller pro software has not been run on MAC based machines.

     

    A kit can be purchased from Alltrax wich includes:

    • Communications cable – RS232 to USB adapter.
    • CD-R with controller pro operations manual, tech notes and the controller pro software program.
    • Wall wart 220VAC 50 Hz  transformer power supplies 15-20 volt DC to power the logic for programming.
    • Instruction manual and technical notes.
    • Free technical support.

    Category:  Speed controllers - Electric vehicles

    Brand:  , Club Car, E-Z-GO, Yamaha

    Date added:  Not recorded

    Date updated:  Not recorded

    Attachments:

    Alltrax_controller_pro_manual.pdf

    Views: 24

  • How to upgrade the Alltrax AXE and DCX Controller Software with USB Interface

    How to upgrade the Alltrax AXE and DCX Controller Software with USB Interface. See pdf file for the following information. Alltrax – AXE – DCX Motor controllers: Communications software.   The pro…

    How to upgrade the Alltrax AXE and DCX Controller Software with USB Interface.

    See pdf file for the following information.

    Alltrax – AXE – DCX Motor controllers: Communications software.

     

    The programmable Alltrax electric motor controllers such as the AXE ( series wound montors) and the DCX ( shunt wound motors) include an RS232 communication port.

    This port can be used to adjust user settings such as throttle type, power settings and speed settings.

    It can also be used to monitor operation of the controller real time.

     

    The program runs on Microsoft Windows based machines, laptops or desktops using simple user friendly controls.

    Alltrax provides this software down-loadable free of charge ( cable not included ).

    Controller pro software has not been run on MAC based machines.

     

    A kit can be purchased from Alltrax wich includes:

    • Communications cable – RS232 to USB adapter.
    • CD-R with controller pro operations manual, tech notes and the controller pro software program.
    • Wall wart 220VAC 50 Hz  transformer power supplies 15-20 volt DC to power the logic for programming.
    • Instruction manual and technical notes.
    • Free technical support.

     

    Category:  Speed controllers - Electric vehicles

    Brand:  , Club Car, E-Z-GO, Yamaha

    Date added:  Not recorded

    Date updated:  Not recorded

    Attachments:

    Upgrading-Alltrax-DCX-AXE-Software_manual.pdf

    Views: 18

This site uses cookies. Some of the cookies we use are essential for parts of the site to operate and have already been set. You may delete and block all cookies from this site, but parts of the site will not work.